CAMSCAN LIMITED releases monthly statements to update the press, customers, suppliers, and affiliates with the latest news and innovations from CAMSCAN.
CAMSCAN Limited releases an outdoor PTZ camera (CS-PTZ8800) that can display video in 0 lux lighting conditions at distances of up to 250 meters.
CAMSCAN Limited today finished the final stage of development and testing for a new cost-effective high definition video module for IP cameras. The module employs Sony’s Exmor chipset and supports 1080p resolution video at real-time frame rates. Further, it supports day & night ICR cut filters and varifocal lenses.
Full HD resolution, multi-streaming, built-in PoE, 3D noise reduction, motion detection, two-way audio support, privacy masking, and ONVIF support are the main features of the new Full HD IP camera module.
The module is available in an indoor fixed lens dome camera enclosure (CS-IPSD6000C) and is ready for mass production. Infrared illuminators are optional on the dome camera.
The plastic indoor CS-IPSD6000 series will come in 3 lens options (A motorized, B vari-focal, and C fixed). Outdoor bullet camera CS-IPIR6000 series will also feature the same 3 lens options.
The cameras will be marketed as the Cost Effective IP6000 SeriesTM and are expected to meet consumer demands for affordable full HD recording.
CAMSCAN Limited today released two new affordable HD-SDI cameras, an indoor and an outdoor version. The two versions employ the same HD-SDI module which uses Sony’s Exmor chipset to achieve Full HD resolution at 30 frames per second.
Following the success of the Cost Effective IP6000 SeriesTM , and due to increased marked demand for affordable full HD surveillance, the new SDI cameras were released.
The indoor version (CS-PD7850) consists of a 4mm fixed lens and 12 IR LED’s, enclosed in a plastic indoor dome casing. The outdoor version (CS-IRF7850) consists of a 4mm fixed lens and 24 IR LED’s, enclosed in an IP66-rated outdoor bullet camera casing. 1080p resolution at real-time frame-rate or 720p at 60 fps, WDR, privacy masking, 3D noise reduction, and intelligent motion detection are some features common to both versions of cameras.
Both models are ready for mass production.
At the end of Q1, CAMSCAN will release a new HD-SDI DVR range from 4 to 16 channels.
CAMSCAN Limited today released an indoor and an outdoor high-end HD-SDI camera. Both cameras consist of the same HD-SDI module which uses Panasonic’s 2.2 megapixel sensor chip to achieve Full HD resolution at 30 frames per second.
The indoor version (CS-PD9850) consists of a 2.8-10mm varifocal lens and 27 IR LED’s, enclosed in a plastic indoor dome casing. The outdoor version (CS-IRV7950) consists of a 2.8-11mm varifocal lens and 40 IR LED’s (to cover a distance of up to 30 meters), enclosed in an IP66-rated outdoor bullet camera casing. 1080p resolution at real-time frame-rate or 720p at 60 fps, WDR, privacy masking, 3D noise reduction, advanced contrast enhancement, digital slow shutter, and intelligent motion detection are some features common to both versions of cameras. An additional CVBS analogue video output comes with both cameras to enable testing during installation using traditional CCTV test equipment.
Both models are ready for mass production.
In cooperation with a Korean explosion-proof housing partner, CAMSCAN Limited today released an explosion-proof PTZ with 36x optical zoom and 700 TVL resolution using Sony’s Effio-P chipset.
The PTZ camera passed EX d II 2D T6, IP66, CE EMC, FCC Class A, and RoHS certifications.
Standard features include real WDR, 32x digital zoom, 3D digital noise reduction, digital slow shutter, 255 preset points, 8 programmable PTZ tours, and 4 PTZ patterns.
Applications for this PTZ include harsh environments with hazardous gases and sensitive plants. The camera can withstand up to 60° temperatures and 80% humidity levels.
CAMSCAN will release the HD-SDI and HD-IP versions of the same explosion-proof PTZ.
In cooperation with a Korean thermal sensor board manufacturer, CAMSCAN Limited today released a thermal PTZ camera with 320 x 240 pixel resolution.
The camera comes in CAMSCAN’s standard rugged 200m IR PTZ enclosure. It consists of two cameras in the same housing. The first is a thermal sensor fixed lens camera and the second a 20x optical zoom HD-SDI module that can display 1080p resolution at 30 frames per second. The thermal sensor video output is displayed as a PIP (picture in picture) while the HD-SDI zoom video output occupies the full screen. Other standard features include built-in wipers, 3D digital noise reduction, 32x digital zoom, and IP66 rating.
Due to large coverage distance, the PTZ camera is ideal for border protection applications, where human or animal intrusions pose the biggest threat. Under CAMSCAN’s tests, humans were detected up to 549 meters away.
CAMSCAN will release the IP camera version of the thermal PTZ by the end of Q3.
CAMSCAN Limited, earlier today, released a new module for analogue cameras which uses Panasonic’s 960H CCD sensor chip and Eyenix’s EN573 (B3) and EN574 (B4) ISP’s.
The new solution will be employed on all CAMSCAN IR 7000 Series outdoor cameras as well as PD710/PD720/B6400 indoor cameras. Varifocal lens cameras use the B4 ISP while fixed lens cameras use the B3 ISP.
The main features of the module are:
CAMSCAN Limited released a new and improved video management software for IP cameras with advanced video intelligence features.
The new video management system supports multi-sites and multi-servers, with up to 64 camera support per NVR. It is compatible with all CAMSCAN cameras and also supports third party systems.
The main video intelligence functions are:
CAMSCAN Limited released a completely new and revolutionary network video recording system.
The new NVR is a single Windows-based centralized hardware and software system that employs VMware and CAMSCAN’s video management software to support up to 2,000 cameras. Full HD resolution at 30 frames per second can be supported across 1,000 cameras in a single centralized NVR system. To complement the high number of video channels, an unlimited number of hard discs can be supported.
Some important features of the new NVR solution include:
CAMSCAN Limited developed a new series of cameras and DVR’s based on AHD technology.
The new cameras deliver 720p resolution video at 30 frames per second over conventional 5C2V or 3C2V coaxial cables or twisted pair cables. This is achieved using Sony’s IMX238 CMOS sensor chip and NextChip’s 2430H ISP chip.
The current AHD solution has been integrated onto a full range of cameras both indoor and outdoor with fixed and vari-focal lens. Hybrid AHD DVR’s have also been released which support 4 and 8 channel video at AHD or standard analogue formats.
CAMSCAN will follow this development with 1080p resolution at 30 frames per second AHD cameras in Q1.
CAMSCAN Limited finished developing and testing a new series of analogue cameras that support 1000 TVL resolution.
Using Sony’s IMX138 CMOS sensor chip, CAMSCAN was able to develop a new solution for indoor and outdoor analogue cameras with 1000 TVL resolution at 30 frames per second. Both fixed lens and vari-focal lens options are available with the current 1000 TVL solution.
Due to the high computing power of the ISP and the double-scan sensor chip feature, some unique options are realized in CAMSCAN’s 1000 TVL solution. For example, real wide dynamic range (WDR) is supported across all CAMSCAN 1000 TVL cameras. Also, intelligent motion detection and tracking is realized, whereby a moving object or human will be tracked.
Other important features include:
CAMSCAN Limited launches its first Ultra High Definition (UHD) IP box camera.
8 megapixel resolution (4K2K) with 30 frames per second real-time streaming means a single camera will equal the coverage of four full HD 1080p resolution cameras. The UHD IP cameras can also stream 6 megapixel resolution at 30 fps, 3 megapixel resolution at 60 fps, or 2 megapixel full HD resolution at 120 fps. Quad streaming is possible to allow for flexibility in any project installation.
CAMSCAN UHD IP cameras utilize Sony’s 8MP CMOS sensor chip and a state-of-the-art SOC to achieve functions such as wide dynamic range (WDR), multiple regions of interest (ROI), 3D noise reduction, auto back focus (ABF), quad streaming support and much more.
These cameras are ideal for applications where a large area needs to be monitored where one UHD camera set to 8 megapixel resolution will replace four full HD cameras. Alternatively, UHD cameras may be installed in areas where there are fast moving objects like a highway where 120 framerates capture vehicle plate numbers.
In Q1, CAMCAN will follow with more UHD IP cameras, namely dome and bullet cameras.
CAMSCAN Limited released two new SDI solutions for indoor and outdoor cameras, both vari-focal and fixed lens.
The first solution is an EX-SDI and HD-SDI hybrid camera solution, where video output may be switched between HD-SDI and EX-SDI via a built-in OSD menu. In either mode, video resolution is 1080p at 60 frames per second. Real wide dynamic range (WDR) is supported across both modes. EX-SDI mode will deliver full HD video over a 300m stretch of RG59 coaxial cable without any signal loss.
The second solution is an EX-SDI, HD-SDI, TVI, and analogue all-hybrid camera solution, where video output may be switched between any of these formats via the OSD menu. Again, 1080p resolution at 60 frames per second with WDR are standard features of CAMSCAN’s all-hybrid camera solution. This possible by employing Eyenix’s ISP in conjunction with Sony’s Exmor sensor chip.
Furthermore, CAMSCAN is working on adding 1080p AHD video output to the same solution, this will be ready by Q1.
CAMSCAN Limited launched an all-hybrid digital video recording (DVR) solution that supports analogue, TVI, HD-SDI, and EX-SDI video formats.
The solution comes in two options, an 8 channel system and a 16 channel system. Both variants support display and recording of 1080p full HD resolution at 30 frames per second per channel across all channels. Up to 8 TB of video can be stored on each DVR.
An advanced mobile phone application (myCCTV) has been released that works on iOS, Android, and Blackberry smartphone platforms.
Other features include:
CAMSCAN Limited has laid the foundation for a partnership with a reputable twisted pair cables manufacturer from Taiwan.
CAMSCAN will ship the first batch of branded twisted pair cables that will include U-UTP, F-UTP, F-FTP, SF-UTP, U-FTP, and S-FTP. The range includes Cat. 5, Cat. 6, Cat. 6A, Cat. 7, and Cat. 7A cables.
All cable cores are composed of 24AWG or 23AWG pure copper cores and polyvinyl chloride (PVC) or polyethylene (PE) jackets. Furthermore, all cables can be produced with low smoke zero halogen (LSZH) jackets.
CAMSCAN always strives to offer a full solution to the CCTV security systems integrator.